IC-R3 광대역수신기 [COMMUNICATIONS RECEIVER]

IC-R3 광대역수신기   COMMUNICATIONS   RECEIVER 바로가기(주문) http://cbham.co.kr/ic-R3.htm

DownLoad

2-inch TFT color LCD built-in! See your information on screen!     [간편설명서]

Impressive operating status display Never before has a hand held receiver given you as much information as the IC-R3. Receiving frequency, tuning step, memory channel number, and more are visible on the 2-inch* TFT color display at a glance. In addition, the back ground color is selectable from 8 available colors. *measured diagonally TV picture receive capability T V수신 Not only can you see your operation status, you can display broadcast visual information. NTSC M, PAL B/G or other television systems are supported*1, depending on version. You can watch TV programs at anytime, anywhere. An FM-TV picture*1 from  wireless camera*2 can also be displayed. Great for sporting events, security, or amateur TV without unpleasant wiring. Also, the IC-R3 offers an A/V output so you can transfer images to a TV monitor or a recording device. *1 some versions do not support any of these systems *2 supplied from third party Signal strength level indicator 신호크기 레벨표시 In addition to the current style of signal strength meters, a signal strength level indicator is adopted. Measures signal strength levels every 0.3 sec. and shows for up to 3 sec., the signal conditions within the period. In addition, when a directional antenna is used, this function helps in searching for signal origin, such as fox-hunting, etc. Simple bandscope Want to analyze signal activity within a band? Spectral activity can be seen on the TFT color display. The simple band scope becomes a useful tool for finding new or interfering signals. With the 5 selectable bandwidths, adjustable to 500 kHz wide will give a quick snapshot of activity. Super wide frequency coverage __  0.495 ~ 2450 MHz !! Covers from 0.495 to 2450.095 MHz of super wide frequency range*1 with AM, FM, wide-FM and TV picture*2 receive capability as standard. *1 some frequency ranges are inhibited with some versions *2 depending on picture modulation system and version Long hours monitoring capability  Lithium Ion battery, BP-206, comes as standard*, for more than 2 times longer operation than other types of batteries, during full feature operation. And the adopted external DC IN terminal allows you to operate with 3.6-6.3V DC power source, or 12V DC power source via the optional CP-18 CIGARETTE LIGHTER CABLE, all day long. In addition, the installed BP-206 can be charged simultaneously, while 5.5-6.3 V DC (more than 1 A) is supplied. *not supplied for some versions Excellent memory  450 channels memory are available and stores operating frequency and mode, as well as tuning step, etc. Up to 6-character memory names can be assigned for each memory channel and shows on the color LCD, allowing quick and easy channel selection. The memory channels are divided into 9 banks, 8 banks of 50 (for individual frequencies) and 1 bank of 50 (for frequency ranges) for simple memory management. *includes 50 program scan edges Multi function 'joy-stick' switch a 4-way action 'joy stick' switch gives you quick and easy access to many settings, including operating band, AF volume, color LCD settings, and more. Automatic squelch The IC-R3 keeps most RF background noise in check by automatically adjusting the squelch. It's very handy when receiving a weak signal__no more continually adjusting the squelch control by hand to block white noise. Also, the squelch level is manually selectable from open, and level 1 to 9. ----- Back ground color variations -----                1 Wireless monitor use example Hobby use example 취미활동에 사용 Install a wireless camera just about anywhere__like looking down from an airplane, balloon, etc. Watch air pictures as they happen. Security use example 보안용 CCTV카메라 수신 Use the IC-R3 to monitor areas where security is an issue, indoors or out. Example of other use 아기방 감시에 사용 Use the IC-R3 as a visual baby monitor. Keep an eye on sleeping children while you're in another room or out in the garden.

SPECIFICATIONS

GENERAL Frequency range : 0.495 ~ 2450.095 MHz* * 816-901.995 MHz range is inhibited for the U.S.A. version. Mode : FM, AM, WFM, AM-TV*1 , FM-TV*2 *1 one of either NTSC M, PAL B or PAL G systems. *2 For 900–1300 MHz, 2250–2450 MHz ranges only; not available in some versions. Frequency resolution : 5 kHz, 6.25 kHz Number of memory channel : 450 (50 channel × 8 banks plus 50 scan edges) Antenna connector : BNC (50) Operating temperature range : -0°C to +60°C ; +14°F to +140°F Frequency stability : ±6 ppm max. (-10°C to +50°C) Power supply requirement : 3.6-6.3 V DC (negative ground) Current drain (at 4.5 V DC) : At rated output   At stand-by   Power save   TV reception   210 mA typical (backlight OFF)   140 mA typical   53 mA typical   730 mA typical (color LCD on) Dimensions  (projections not included) : 61(W) × 120(H) × 32.9(D) mm;   2 13/32(W) × 4 23/32(H) × 1 9/32(D) in Weight : 300 g; 10.6 oz  RECEIVER Receiver system : Triple-conversion* superheterodyne * below 1150 MHz; Quadruple-conversion for above 1150 MHz Intermediate frequencies  (Unit MHz)   AM,FM WFM C3F(TV) U.S.A. Europe 1st 240.1 240.1 241.85*1 , 238.35*2 2nd 26.05 13.25 45.75 38.90 3rd 0.450 0.450 __  *1 30-799.995, 1321-2099.995 MHz range  *2 800-1320.995, 2100-2450.095 MHz range Sensitivity (typical)    AM  (at 10 dB S/N) 0.495-4.995 MHz 5.0-29.995 MHz 118-136 MHz 222-329.995 MHz 1.4 µV 1.0 µV 0.79 µV 1.0 µV  FM  (at 12 dB SINAD) 1.625-4.995MHz 5.0-469.995 MHz 470-799.995 MHz 800-1999.995 MHz 2000-2299.995 MHz 2300-2450.095 MHz   0.32 µV 0.25 µV 0.45 µV 0.56 µV 1.0 µV 1.8 µV  WFM  (at 12 dB SINAD)   76-107.995 MHz 175-221.995 MHz 470-769.995 MHz 1.0 µV 1.0 µV 1.8 µV Selectivity    FM, AM    WFM More than 12 kHz/-6 dB Less than 30 kHz/-50 dB More than 150 kHz/-6 dB Audio output power(4.5V DC) :100mW  typical at 10% distortion with an 8 load External SP connector : 3-conductor 3.5 (d) mm (1/8")/8 Video/Audio OUT connector : 3-conductor 3.5 (d) mm (1/8")/8

Supplied accessories

Antenna Belt clip Battery spacer Li-Ion battery cell assembly* Wall charger* *depending on version All stated specifications are subject to change without notice or obligation.

OPTIONS

BP-206 Li-Ion BATTERY CELL ASSEMBLY  3.7 V/1650 mAh Lithium Ion battery pack. BC-135 DESKTOP CHARGER  For rapid charging of battery pack, BP-206. An AC adapter, BC-123 or BM-104, is supplied with  the charger. Charging time: approx. 2.5 hours BC-136A/D WALL CHARGER 6 V DC, 500 mA output AC adapter for regularly charging the installed battery pack, BP-206. Charging time: approx. 10 to 15 hours. LC-151 CARRYING CASE Helps protect the receiver from scratches, etc. CP-18A/E CIGARETTE LIGHTER CABLE Allows you to operate the receiver through 12 V cigarette lighter socket, and also charges installed battery pack. A DC-DC converter is built-in. SP-13 EARPHONE Provides clear audio in noisy environment. CS-R3 CLONING SOFTWARE + OPC-478 CLONING CABLE Allows quick and simple setting of receiving frequencies, memory names, etc, from a PC (Microsoft� Windows�95/98). OPC-474 CLONING CABLE Used for data cloning between receivers.

무전기

돌아가기

Receiver

위로

화면닫기